Sam Song and press fit cranks

Discussion in 'Observed Trials Discussion' started by AndyT, Jan 31, 2017.

  1. AndyT

    AndyT New Member

    13,053
    91
    0
    Sam did you go round eye? :

    ImageUploadedByObserved Trials1485839605.069451.jpg


    Also what kind of pimp cranks can I put in my Gu with press fit whatever? The slx on my hex too strong, Gu feels like mehhhh
     

  2. Sam.S

    Sam.S Active Member

    1,861
    0
    36
    [ame]https://www.youtube.com/watch?v=gV62pqS7AAA[/ame]

    Just dropping it here
     
  3. AndyT

    AndyT New Member

    13,053
    91
    0
  4. justfuzzit

    justfuzzit Member

    619
    1
    18
    Racingline 30mm press-fit cups for 37mm shells (Gu)
    + Wheels MFG universal BB30-24mm adapter kit
    = Boost SLX cranks on your Gu....
    ----> Will the 22t fit?
     
  5. AndyT

    AndyT New Member

    13,053
    91
    0

    Was looking at those new one piece trials 18t crewkerz cranks... but $400??? That's more than a much needed XT 1x11 set up for my everyday excellence bicycle...
     
  6. justfuzzit

    justfuzzit Member

    619
    1
    18

    Hm, haven't seen them! But yeah, that's a little pricey...

    I wonder how much a machine shop would charge to make more custom rings like what I have on my Turbine cranks. My ring is already munching out, being aluminum. But the cranks are solid!
     
  7. My Little Pony

    My Little Pony Active Member

    1,047
    3
    38
    Try to make the SLX cranks work on your Gu. I want to know how well it works.
     
  8. tda

    tda tda

    1,349
    6
    38

    Attached Files:

  9. AndyT

    AndyT New Member

    13,053
    91
    0
    Looks like my best option would be trialtechs new press fit bb, which makes the spindle much wider- and some trialtech sl cranks... are they that much stronger? Personal experience? Unsure if an isis will ever feel as strong as this hallowtech or whatever shimano technology is in the slx.

    Unsure if I could fit the slx on the Gu, the yoke and chain line.... I'm sure it could be done but I only have a vice and a few files and hammers, no machine shop here.
     
  10. Sam.S

    Sam.S Active Member

    1,861
    0
    36
    Hey guys whassup?
     
  11. Sam are your ankles better yet? You fuckin kook
     
  12. tda

    tda tda

    1,349
    6
    38
    Hey brother how are you? Any tips on sidehops- I know from rear wheel is pro, and both wheels is hella old school- but what about from a front wheel?

    Now we’re doing hashtags !!