Separate names with a comma.
Discussion in 'Your Bike Trials Media' started by echoteam13, Jun 23, 2004.
a hand drawn sketch of my future bike
thats pretty crazy man u got skills, wat did u use to draw it?
-a black sharpie
-a 32 color set of prismicolor professional drawing markers
*thanx for the props*
textas it seems.
oh... i almost forgot...
-and photo shop (cuz the pic didn't fit in my scanner)
the front tire is gay, and shimano air lines spokes wont be available for at least another 3 years...but they are still o nthe preliminary stage of mock-up testing. plus. the head angle on that zoo is horrible.. i would never ride it. zoo is stupider now imo
i'll have this in two weeks
You are getting an ugly bike with a bent fork?
nice bike ed.l
i will have xtp 20" in a week ....i hope. top that one Ed
just wait till I bust out with paint and show you guys my skills
I'm jealous :| I need a trials spec bike :|
is the fork bent? i think the bike is beautiful.:yum:
i now see that i drew the head tube too steep. i had unfortunately misplaced my protractor.
just because the fire xc is really floppy and small, and has no grip doesn't mean it's gay. plus it is extremely light. (580g):dunno:
its gay. get a maxxis minion single ply super tacky. its hte best front tire ever .
the fire xc is a good training tire, because if you switch to a tire that grips you get a whole lot better.
STFU im sick of this gay talk. "gay" this "gay" that
Go find another word for christ sake, and take andrew with you.
the xtp 26" is a very good trialbike, i like it and want one to have too. the xtp 20" is not a good innovation on the mod sector, because the advantages from a 26" xtp don´t work on the 20", i think so.
LooK´s at the rear seat-cnc-piece from the 20" xtp, it is useless, because the maggie-mounts are on the tubes and not of the cnc piece.
:ugh: thats like saying a "support" between the seat stays is usless because the brake is attached to the tubes.
nice bike .... but , youve already have had a bad tap and bent your fork, haha , or ... maybe you have the fork the wrong way on ! hehe =)
Piss off-What you said is completely false. What you just said was: "a Bike only needs to be stiff where the brake mounts are. Because the mounts are not CNC' welded, the design is completely useless"
Don't post useless schtuff.
you don´t anderstand me!!! i think avery are now a kiddy because every gives of every shit negativ reputations instead to discuss it on this forum.
just bought you a xtp 20" , has you not right!!! Look at the xpt 26" and look at the xtp 20", its obvius that the cnc( LooK at xtp 20" there is on the seattube a cnc) part and it hasn´t the maggie mount, i hope you can see it. of course this is my mind,OK???!!!