ENO tials freewheel

Discussion in 'Observed Trials Discussion' started by mr onza, Dec 18, 2004.

  1. mr onza

    mr onza Guest

    41
    0
    0
    hi guys
    i have been using the eno trials front freewheel for about 2 months or so and i had a look at itand it seems to have a bit of play as n you can actually MOVE the freewheel and when you roll the bike backwards it makes a horrbile niose whihc i dont kwno how to explian.
    so any of you guys no what might be the problem?


    thanks

    alex
     
  2. manimal

    manimal New Member

    699
    5
    0
    I'd check two things:

    1) chain tension
    2) pitch of you chainline

    both of those if not setup right can ruin a freewheel
     

  3. mr onza

    mr onza Guest

    41
    0
    0
    yeh ok the noise is sorted and ill try those two things thanks
     
  4. Elan

    Elan steve french

    9,733
    109
    63
    they do get loose. tighten it up
     
  5. tomacropod

    tomacropod Rum Pig

    4,881
    87
    0
    everything gets loose. The only thing that can't be tightened is your mother.

    - Joel
     
  6. mr onza

    mr onza Guest

    41
    0
    0
    it is tight the lockring is anyway.
    how do you tighten uo the freewheel then the lockrings fine .