Echo Pure

Discussion in 'Observed Trials Discussion' started by EchoPure89, May 22, 2004.

  1. EchoPure89

    EchoPure89 Guest

    79
    1
    0
    i just measured a lot of stuff on my Echo Pure.
    I have the echo pure '1060' when its actually 1073mm wb.
    im supposed to have a pure fork thats 420mm axel to crown but i have a low koxx fork that is 386mm axel to crown which brings my head angle from a '71.5' to a 73. Due to my ultra short fork, i should have a 13" high bb but no, ive got a 12 3/4".
    Echo's run big, if i have a short fork, and i have a '1060' and its 1073, then if i get a pure fork then itll be about 1075 or maybe 1080. crazy. then the pure '1080' is prolly around 1090....... interesting....
     
  2. sebLG

    sebLG New Member

    577
    2
    0
    maybe your frames got mixed up and you are actually riding a 1080 not a 1060.
     

  3. thetart20

    thetart20 TartyBikes

    1,816
    33
    48
    Sounds about right. I dont think anyone in China can measure properly.
     
  4. pav

    pav New Member

    1,258
    14
    0
    yeh i remember them saying pitbull is 1060 wheelbase and mine measures out to 1080 which i think is a good thing!!

    pav
     
  5. EchoPure89

    EchoPure89 Guest

    79
    1
    0
    nah, ive held my frame next to a 1080 pure frame, mine is much smaller. After about 3 hours of measuring and calculating (4 cups of coffee) later, i figured that with a pure fork, i will gain 6.4mm to wheelbase bringing it to a 1079.4, i think i could call it a 1080.