Observed Trials banner

DMAN-Ti-Fighter 24" trials/street rig-BUILT UP!!

5093 Views 37 Replies 14 Participants Last post by  THEDEMOLITIONMAN
10
Bicycle Tire Wheel Bicycles--Equipment and supplies Bicycle frame
I finally completed the build the way I wanted it, took a bit longer than anticipated..lol

Specs:

Frame- Custom Titanium-Geo's close to the Arcade/Rear 142 X 12 Thru-Axle

Fork- SE Racing Steel/ 150 X 15 Front Thru-Axle/Post Mount

Stem- Custom Titanium(70mm/35deg)

Bars- Atom Lab Riser DH Gold, Spank Bar Ends

Grips- Ouri Green/M:part Grip Stops

Brakes- Hope Tech 3 Lever/Orange/7" rotors/Jitsie Disc Pads/- Post Mount Hope-Trial Tech

Headset- Chris King 1/1/8th/ 1.5 Inset/
I had to drill a hole into the top cap for the brake cable.

Wheels- Front- Spank Prototype 24", built to a I9 hub with custom spokes
Rear-/Spank Prototype 24", built to an I9 with custom spokes
Thru-Axles- DT/Swiss

Seat-Deity Tekstyle, Pivotal, Blue

Seatpost- Deity Syringe, Blue

Clamp- Deity Cinch, Blue

Cranks- Saints 170 Hollowtech, 4 bolt, Black

Bashing- BlackSpire, Granny God

Chainring- Black Spire, 22t

Bottom Tube Protection- Pro-Carbon Racing Carbon Fibre

Pedals- Deity Decoy, Blue

Bottom Bracket- Shimano Saint bottom bracket-68/73mm/Gold

Tires- Continental Tires 24 X 2.4 F/R

Chain- IG8- ½ x 1 ⅛

Chain tensioner- Custom made chain tensioner, I had to actually machine it myself to get it to work with my chain and the wheel.


This is a more detailed, colorful build than I'm use to doing..it's different.

thedman
Bicycle Tire Wheel Bicycles--Equipment and supplies Bicycle frame
Bicycle Tire Wheel Bicycles--Equipment and supplies Crankset
Bicycle Wheel Tire Bicycles--Equipment and supplies Bicycle wheel rim
Bicycle Bicycle handlebar Bicycle tire Bicycle fork Bicycle frame
Bicycle Tire Wheel Bicycles--Equipment and supplies Cabinetry
Wheel Tire Bicycle wheel Crankset Bicycles--Equipment and supplies
Tire Wheel Bicycle tire Bicycle handlebar Motor vehicle
Bicycle Wheel Tire Bicycles--Equipment and supplies Bicycle wheel rim
Bicycle Wheel Tire Bicycles--Equipment and supplies Bicycle wheel rim
Tire Automotive tire Bicycle tire Light Tread
See less See more
21 - 38 of 38 Posts
Cool, just been having a look at his work. Really like the tensioner grip.

How much did the frame cost?
He does amazing work, it was on the super-duper high side, it is Titanium and hand made..

It's definitely worth if it, if you want to spend the scratch..


Thedman
He does amazing work, the was on the super-duper high side, it is Titanium and hand made..

It's definitely worth if it, if you want to spend the scratch..


Thedman
Didn't think you'd like to answer that one :p

I've been toying with the idea for a long time and with my 30th coming up in January I think I might treat myself. Doubt I'd use a highly regarded frame builder, probably just go through a far east manufacturer. A friend uses them a fair bit and the work is excellent.

Seeing yours has just made me want to get the ball rolling. :h5:
I've been toying with the idea of getting Moots to make me a Ti frame. I'm pretty happy with the geo of the Maestro I have and i would just copy that geo...make it like the last trials frame I buy....or atleast one that will last me a good long bit.
The frame and stem were welded by Scott Quiring..


Thx,

Thedman


Took my old brain a while to remember where I knew Scott's name from....think he used to be the builder at Slingshot way back when....cool.




Steve
Didn't think you'd like to answer that one :p

I've been toying with the idea for a long time and with my 30th coming up in January I think I might treat myself. Doubt I'd use a highly regarded frame builder, probably just go through a far east manufacturer. A friend uses them a fair bit and the work is excellent.

Seeing yours has just made me want to get the ball rolling. :h5:
I was lucky enough to be apart of the first WTF welded by FTW in 07' and then FTW made me another frame I now call the Hulk Smash in 2011'.

Then I had a few custom frames welded by RCP, custom frames are awesome.Custom frames are in my eyes, a great way to go and they usually last longer than mass produced frames..at least for me..lol

This is my second custom titanium frame and Quirings quality definitely surpasses my last one by far.So I'd give him a shout and see if he's able to do it.

I was able to get my frame through my sponsor, I'm sure Quiring will make an individual frame for you.Custom frames take forever, at least they did to get mine made, so if you're serious.I'd get on this ASAP and try an make it happen.

Hope your 30th goes well and he's able to do it for you..

Thedman
Took my old brain a while to remember where I knew Scott's name from....think he used to be the builder at Slingshot way back when....cool.




Steve
I've heard of slingshot, I never new he was apart of it.The welds on this frame are amazing, nickel welds all the way..

thedman
8
Wheel Tire Bicycle tire Automotive tire Bicycle hub
Bicycle Tire Wheel Bicycles--Equipment and supplies Bicycle tire


Bicycle Tire Wheel Crankset Bicycles--Equipment and supplies
Bicycle Wheel Tire Bicycles--Equipment and supplies Crankset
Wheel Tire Bicycle tire Automotive tire Bicycle hub
Bicycle Tire Wheel Bicycle wheel Bicycles--Equipment and supplies
Wheel Tire Bicycle Bicycles--Equipment and supplies Crankset
Tire Bicycles--Equipment and supplies Wheel Crankset Bicycle hub
Updates DMAN-Ti-Fighter build-


I was able to get my hands on a prototype set of Wide Silver, Spank Rims, an I9 set, could only run the front with my chain set up..The build definitely looks pretty sick now..


Thedman
See less See more
Agrade laying hot fire drawings up and down the streets
G
Do one that says frappucino.
shine it brah

Not bad..nice job on my chain and I've got a great head..I'm sure Ot would be proud:bigthumb:


Glad you liked the new rig Agrade..:werd:

Thedman
assgrade? I put heaps of effort in to that and I thought you'd like it :wtc:
assgrade? I put heaps of effort in to that and I thought you'd like it :wtc:
Damn autocorrect my bad man..I didn't catch that..my bad I'll fix it..I def like it..


Thedman
ps in my drawing you were complimenting Ot on his shiny head. the word "yeah" was in his head because he was stoked with your compliment. also I was fucking wasted.

your bike is rad too.
ps in my drawing you were complimenting Ot on his shiny head. the word "yeah" was in his head because he was stoked with your compliment. also I was fucking wasted.

your bike is rad too.
Yeah man..totally cool and I'm glad you liked the build.I need to stop making posts via my cell phone..one time I sent a text..stating I F.dogs lol..


Thedman
21 - 38 of 38 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top