CoppellStereo Brake Mod Part: 2

Discussion in 'Observed Trials Discussion' started by CoppellStereo, May 23, 2004.

  1. CoppellStereo

    CoppellStereo Ruff Rider

    2,781
    339
    83
    Hey guys, I did a little more modification to my brakes, and thought you guys would want to see it, i custom 'fabricated' barrel adjusters for my brake lines, and now the brakes work perfect.

    [​IMG]

    [​IMG]

    [​IMG]

    So now i have control over the tension in each brake cable, and I also took off my other lever, which makes it look cooler :bigthumb:

    And also my mom said I might be able to sell my XC bike so I can get a 'real' Trials bike, so if you have any new, or almost new frames, that are good, but also not expensive (unless you want to sponser me :rofl: ).
     
  2. Elan

    Elan steve french

    9,733
    109
    63
    good idea...
     

  3. OTAdmin

    OTAdmin Administrator Staff Member

    2,984
    105
    63
    Damn, thats a really good idea :bigthumb:
     
  4. Elan

    Elan steve french

    9,733
    109
    63
    why you gotta steal my line bitch?

    p.s. is that redline a single speed?
     
  5. CoppellStereo

    CoppellStereo Ruff Rider

    2,781
    339
    83
    yeah, its single, running 32:18. :D
     
  6. Elan

    Elan steve french

    9,733
    109
    63
    single speeds are awesome
     
  7. urban_artist

    urban_artist New Member

    18
    1
    0
    [​IMG]
    [​IMG]

    you can also buy levers that will fit two cables and they have two seperate adjusters, there for bmxers that run gyros but don't wat to use a cable splitter I can't remember what company makes them but there are quite a few different tiypes out there just cheak at your local shop.