need megamo bar and stem (stock)

[mike-87@rogers.com]

NEED MEGAMO BAR AND STEM

hey guys justr found out that i cant run any other bar/stem combo becuase megamo makes their steerers so short for brisa atemsna and other lik ebrisa soo i need a megamo bar and stem please

thanks
MIKE

[oicdn]

do what? You can run ANY BAR AND STEM YOU WANT....both me and DangerousDave have Megamo's and I know I don't have a Megamo Bar and stem.....there's prolly spacers there...take those off and use another stem. Otherwise, but a new steertube....cause if no other stem will fit, chances are, neither will the Megamo stem...

[mike-87@rogers.com]

really so with a megamo fork and a zero stack head set i can use a lets say brisa bar and stem if this is true then u guys saved my life


thanks
MIKE

post an answer please

[B1105]

measure the steerer tube, its impossible for us to tell. you may be right if your steerer tube is too short, but otherwise you should be able to use whatever stem you want. you definitley need to be put in the kiddie korner also

[oicdn]

Yeah...I have the Megamo fork and Zero Stack....

If no stem will work, neither will the Megamo one.....cause that'll mean there's no steer tube to clamp to.....

[B1105]

Yea... I never said no stem would work. I was stating that...nevermind, not worth even writing it

[oicdn]

^^LOL, I wasn't even directing that at you.....

[ko]

I bought a megamo radical and the steer tube on the fork only goes above the headset by 3 cm's meaning that you need a stem with a 4cm clamping height or it will be dangerous to ride and risk it breaking. The megamo stem has a 4 cm clamping height and the brisa's are like 5cm meaning it wont work...well it would work but would be very dangerous. race face stem work. You have to run a megamo stem or another mtb stem that has a 4 cm clamping height.

[oicdn]

Eh...well mine came with more than enough steertube...I had three 1/4in spacers on mine with an Echo stem.....