Gear ratios now for a stock?

[THEDEMOLITIONMAN]

Back when I use to run a stock, I ran 22/19..then I hear all different types of ratios and with these cranks..besides the race face, I am limited to a track cog or a FFW..






Throw down some gear ratios..I am ALL URBAN..I ride natural when I leave my dirt drive way..lol

THEDMAN

[MIKE1968]

22-19 is what i run BRO!! ALL URBAN 2

[Rodmunch]

22-18, don't be a pussy! :p

[goose]

used to 22-19, just tried 24-21 recently. Feels great.. just a 'tiny' bit easier...

[rush]

20-17.

[stpatr3k]

I use 22-19 too

Used to have 22-18 but 22-19 is more all-around.

[willapaj]

18-15 when I ran FFW.

[Bryan]

18-15 is baller

16/13 on burns would be -er

[mikeyr89]

20-17... it's great IMO

[va_tick]

18-15 for urbanz if your running ffw, 18-16 if your legs are on the weaker side...

[KeepRollin]

18-15 for urbanz if your running ffw, 18-16 if your legs are on the weaker side...

uh oh.... did you just call the Dman weak?!?!?

[va_tick]

If I did then I'm calling myself weak b/c I'm running 18-16...mwhahaha

[eastside]

I run 18/16...I ride alot of natural. Good for urban too. You just have to give it a little more at run up.

I am going to try 22/19 on my FreeTrial, but it sounds like 24/21 might be nice too.

[Soapster887]

I'm running 18/15 on my stock. Works fine for me.

[tybikes]

Bobby, knowing your style and the fact that you only ride urban, you'd be fine with a 26-21. I rode it for awhile and it was awesome for most everything except for some rear wheel moves where you really have to power through. I'm not a super strong rider, so i had some issues with that, but only on natural, so you should be fine.

[THEDEMOLITIONMAN]

I think I'm going to give 18/15 a try and see how that goes..







thanks,

THEDMAN

[Tha Goat]

I'm currently running 20-14 and I mostly ride only urban.:dunno:

[miker27]

just switched from 18-16 to 16-14. I thought 18-16 was rubbish, but I've got track legs:luke:

[RomanC]

18-15 for me. Works well on natural and on urban. I don't think I would run a smaller cog upfront to save the chain from total rapage. Get the heatsink burnz combo ;) Although, with the current exchange rate it will be quite pricey.

Edit: I also use 175 cranks for extra power