smudge
12-14-2007, 05:03 PM
The end of this year hit us hard in the pockets, so stuff has to go. Prices don't include shipping. Anything over $50 will be sent insured and actual shipping prices will be charged. I can take piccies of any of this stuff, so if you need em, PM me.
Pegoretti Fina Estampa frame – $1200
Never crashed, never raced. 57cm; Ouzo Pro Fork; WR Compositi carbon post, seat clamp included. King headset (black or pewter) can be included for extra. Choice of Ital threaded Dura Ace external bearings or older style DA octalink included.
SRAM Force brake calipers never mounted - $140
NIB Reynolds Ouzo Pro 45mm rake - $215
Selle Italia Flite SLR - $60
This has a few hundred miles of use and has some scuffing at the rear edge of the saddle.
2004 Specialized S-Works Epic frame - $500
Size Large, red and white disc only. The canti mounts were carefully filed off by a builder.
Avid Saago stem - $45
This has never been used but it was supposed to be a 110mm stem; it’s actually a 120. 10deg rise, black and made for 25.4mm handlebars. The steerer clamp is pretty darn cool.
Other random goodies
2) Shimano XT 760 44t outer chainrings. Never used. Take offs - $40 ea
1) Shimano XTR 960 44t outer ring . Never used. Take off - $60
1) New Boone titanium 20t chainring SPLINED FOR DIRECT MOUNT to XTR 952 cranks
1) slightly used Boone titanium 19t chainring SPLINED FOR DIRECT MOUNT to XTR 952 cranks
2) pairs of used Candy SL MTB pedals. Blue
1) pair of Quattro SL pedals. Black, low mileage
Salsa steel quill stem - looks to be about 125mm extention and -12 rise (it's more than 10, less than 15, I'm guessing here) quill for 1" steerer
Chris King 32h hubshell - Silver, used and shell only - $30
Nuke Proof 32h front hub - used, carbon fiber, I've got a spare set of bearings for this floating around somewhere which will go with it.
Suntour Superbe Pro track hub - used bolt on, rear, 32h, high flange and the bearings are smoooooooooth. NOTE: some jerkoff (not me) stripped a couple of the LH lockring threads. Two of four full threads remain, the other two aren't completely gone, but they're not all there either. Comes with Dura-Ace lockring.
Thomson elite stem - $45
90mm extention +15 rise, black, used.
XTR 960 24t small ring; new - $20
Plazmatic brake pads - $7/pair
I have about ten pairs of these. THEY'RE JUST INSERTS! You have to already own backings for these. Will work with either the CRM or CRV machined backings...other backings as well if you modify the pads.
Sean
Pegoretti Fina Estampa frame – $1200
Never crashed, never raced. 57cm; Ouzo Pro Fork; WR Compositi carbon post, seat clamp included. King headset (black or pewter) can be included for extra. Choice of Ital threaded Dura Ace external bearings or older style DA octalink included.
SRAM Force brake calipers never mounted - $140
NIB Reynolds Ouzo Pro 45mm rake - $215
Selle Italia Flite SLR - $60
This has a few hundred miles of use and has some scuffing at the rear edge of the saddle.
2004 Specialized S-Works Epic frame - $500
Size Large, red and white disc only. The canti mounts were carefully filed off by a builder.
Avid Saago stem - $45
This has never been used but it was supposed to be a 110mm stem; it’s actually a 120. 10deg rise, black and made for 25.4mm handlebars. The steerer clamp is pretty darn cool.
Other random goodies
2) Shimano XT 760 44t outer chainrings. Never used. Take offs - $40 ea
1) Shimano XTR 960 44t outer ring . Never used. Take off - $60
1) New Boone titanium 20t chainring SPLINED FOR DIRECT MOUNT to XTR 952 cranks
1) slightly used Boone titanium 19t chainring SPLINED FOR DIRECT MOUNT to XTR 952 cranks
2) pairs of used Candy SL MTB pedals. Blue
1) pair of Quattro SL pedals. Black, low mileage
Salsa steel quill stem - looks to be about 125mm extention and -12 rise (it's more than 10, less than 15, I'm guessing here) quill for 1" steerer
Chris King 32h hubshell - Silver, used and shell only - $30
Nuke Proof 32h front hub - used, carbon fiber, I've got a spare set of bearings for this floating around somewhere which will go with it.
Suntour Superbe Pro track hub - used bolt on, rear, 32h, high flange and the bearings are smoooooooooth. NOTE: some jerkoff (not me) stripped a couple of the LH lockring threads. Two of four full threads remain, the other two aren't completely gone, but they're not all there either. Comes with Dura-Ace lockring.
Thomson elite stem - $45
90mm extention +15 rise, black, used.
XTR 960 24t small ring; new - $20
Plazmatic brake pads - $7/pair
I have about ten pairs of these. THEY'RE JUST INSERTS! You have to already own backings for these. Will work with either the CRM or CRV machined backings...other backings as well if you modify the pads.
Sean