Looking for trials factory pics.

[Biketrialbrasil]

Hi guys.
i´d like to find some trials or any frame factory pics, with some pre-weld frames, and that tool that hold the frame for weld..."frame holder"?
i need some pics, soon i´ll build one.
or one website that have these informations....
thanx in advance.
pics like that (i have more from toxsin and i need more other):

http://www.observedtrials.net/otn3/toxsin14.jpg
http://www.observedtrials.net/otn3/properjiggy.jpg

[Laimis]

toxsin - handsmade????? :werd:

[john trials]

Check out http://www.anvilbikes.com/

They make frame fixtures for welding bicycle frames. Search their site. There are lots of pictures.

[smudge]

what do you want to see? I have frame fixtures, mitering fixtures, brake boss holding fixtures, a tubing bender lots o small parts and a few hundred feet of titanium tubing.

If you really want a good resource for building frames, go to frameforum.net.

I wish you the best of luck and one suggestion...thicken up your skin.

edit: most of my fixtures are from Anvil. except a small one that i'm building right now...that I'm not showing anyone.

[Chris]

Deng at work.

http://www.greenpeace.org/raw/image_full/international/photosvideos/photos/chinese-man-smelts-computer-pa.jpg

[MIKE1968]

ooooh...I could get started on this one...but I'm too busy working :(

[Eisbein]

:hahano: :x: :x: :D :D
Deng at work.

http://www.greenpeace.org/raw/image_full/international/photosvideos/photos/chinese-man-smelts-computer-pa.jpg

[kobrakai]

http://www.simtrabikes.com/media/prodpics0031hi.jpg

http://www.simtrabikes.com/media/prodpics0032hi.jpg

http://www.simtrabikes.com/media/prodpics0030hi.jpg

http://www.simtrabikes.com/media/prodpics0033hi.jpg

http://www.simtrabikes.com/media/prodpics0034hi.jpg

http://www.simtrabikes.com/media/prodpics0035hi.jpg

http://www.simtrabikes.com/media/prodpics0036hi.jpg

[stocktrials]

oh noes! they snapped!!!

[lucky13]

Jig?

[smudge]

Jig?

Lure?

[Biketrialbrasil]

Check out http://www.anvilbikes.com/

They make frame fixtures for welding bicycle frames. Search their site. There are lots of pictures.thank you John.:bigthumb:

[Biketrialbrasil]

Deng at work.

http://www.greenpeace.org/raw/image_full/international/photosvideos/photos/chinese-man-smelts-computer-pa.jpgahhhahahahahahahahaha:hahano: :bowrofl: :bowrofl: :bowrofl: i have some deng pics here...

[Biketrialbrasil]

thanx all...if someone have more...
and yes i mean jigs

[lucky13]

Lure?

"Hey fish, uh, I have a keg, and the ladies are coming over,.. we're dancing,... get in the boat fish fish..."

[lucky13]

Post what you have already, eh?

[Biketrialbrasil]

i have some here:

http://www.observedtrials.net/otn3/factory_front.jpg
http://www.observedtrials.net/otn3/needzstayz.jpg
http://www.observedtrials.net/otn3/frame201_04.jpg
http://www.observedtrials.net/otn3/toxsin12.jpg
http://www.observedtrials.net/otn3/frame2test001.jpg
http://www.observedtrials.net/otn3/USA_trial2.jpg

[tomacropod]

what do you want to see? I have frame fixtures, mitering fixtures, brake boss holding fixtures, a tubing bender lots o small parts and a few hundred feet of titanium tubing.

If you really want a good resource for building frames, go to frameforum.net.

I wish you the best of luck and one suggestion...thicken up your skin.

edit: most of my fixtures are from Anvil. except a small one that i'm building right now...that I'm not showing anyone.

OK now I'm curious :)

- Joel

[stefan]

Deng at work.

http://www.greenpeace.org/raw/image_full/international/photosvideos/photos/chinese-man-smelts-computer-pa.jpg

LMAO !!
:h5:

[trialsrider50]

"Hey fish, uh, I have a keg, and the ladies are coming over,.. we're dancing,... get in the boat fish fish..."

"come on, get in da boat FISHY! come on, get in da boat FISH! FISH!"

[smudge]

"Hey fish, uh, I have a keg, and the ladies are coming over,.. we're dancing,... get in the boat fish fish..."

and some phytoplankton...

[smudge]

OK now I'm curious :)

- Joel

bicurious? ;)

It's nothing too terribly exciting. Just something to suit my needs, but I want to make it before anyone else puts one on the market so I can sell it and take over the world! mwu! ha! ha!

not really.

Actually, I'm fucking tired of sharing my ideas and being ripped off. ForgeMTB and Pashley/Matt Tongue ripped me off years ago, Boone took credit for one of my designs (that I sent him a SolidWorks file of) and made some change off of that, and somehow, things have a habit of turning up publicly months after I tell someone what I'm interested in doing. Part of the reason I'm building now is because I'm tired of being in the design seat and not getting credit. So now, I'm (mostly) going to keep my trap shut until I have a product to show. Then it'll be easier to say "hey, that was mine"

For the record, this will be a small public thank you to Steve at Heatsink for asking for my input before putting a few of his products on the market. Thanks Steve.

[smudge]

Here are pictures of my factory. Notice no mill yet. Right now I'm using one of Chuck Norris' beard hairs strung up in a 7" coping saw to miter my tubes.


http://www.observedtrials.net/otn3/IMG_2774%20%28Small%29.JPG
Dropouts and other misc stuff

http://www.observedtrials.net/otn3/IMG_2775%20%28Small%29.JPG
Steel BB shells, ti bottle bosses and cable saddles
http://www.observedtrials.net/otn3/IMG_2777%20%28Small%29.JPG
ti bb shells, sliders, welding goodies and purge plugs
http://www.observedtrials.net/otn3/IMG_2778%20%28Small%29.JPG
more welding goodies and seat tube sleeves

http://www.observedtrials.net/otn3/IMG_2780%20%28Small%29.JPG
one of the places I keep stuff

http://www.observedtrials.net/otn3/IMG_2781%20%28Small%29.JPG
Jigs, lures and many ft of ti tubing

http://www.observedtrials.net/otn3/IMG_2783%20%28Small%29.JPG
Notorious BBG
http://www.observedtrials.net/otn3/IMG_2784%20%28Small%29.JPG
experiment in seat stay bending with the wrong sized bending die
http://www.observedtrials.net/otn3/IMG_2785%20%28Small%29.JPG
replacing these with...


http://www.observedtrials.net/otn3/IMG_2786%20%28Small%29.JPG
this, which I turned last night
http://www.observedtrials.net/otn3/IMG_2787%20%28Small%29.JPG

http://www.observedtrials.net/otn3/IMG_2789%20%28Small%29.JPG
first line of defending the shop from PACNW meth heads and urban dwelling hipster doofi
http://www.observedtrials.net/otn3/IMG_2790%20%28Small%29.JPG
second line of defense.

[Biketrialbrasil]

curious...

[carsinnWilson]

that's cool

[rush]

:cool:

[lucky13]

Fuckin baller.

I think I know where my custom frame is going to be made.

[biketrials25]

Check it out,,, No frames yet,,,

Just finished the bike rack. And the concept was not my idea, I seen some pics on here and used that as a starting point. Just an FYI

[lucky13]

I dunno about the weight of a big steel rack hanging off the back of a jetta man.

Try aluminum in the same form and drill the crap out of it.

[toyota200x]

That steel rack looks like it would weigh a lot.

[matiaspioli]

Deng at work.:eek3::wiggle::wiggle::wiggle::wiggle::wiggle ::wiggle::):yum::coold: JAJAJAJAJAJAJAJAJAJAAJJAJA:naughty:

http://www.greenpeace.org/raw/image_full/international/photosvideos/photos/chinese-man-smelts-computer-pa.jpg

[smudge]

Check it out,,, No frames yet,,,

Just finished the bike rack. And the concept was not my idea, I seen some pics on here and used that as a starting point. Just an FYI

Nice Ben. Can't wait to see what you come up with.

[biketrials25]

Yeah it weighs about 70lbs.

[Cultiv8ed Stan]

Deng at work.

http://www.greenpeace.org/raw/image_full/international/photosvideos/photos/chinese-man-smelts-computer-pa.jpg

LOL!! :bigthumb: