Random parts and tools for sale!!!

[Genital Apparatus]

Welcome to my sale of random parts, tools, and other stuff.

I've got an Avid BB7 203mm (8") rear disc brake. The system is practically new, used it lightly for about two months. Most of that time I spent breaking in the pads that I had for it. The IS mount is for rear only, if you want to put it on the front you have to get (or make) a different mount. The brake comes with two sets of pads, both are in fairly new condition. Comes with the stock Avid pads which are fairly broken in, and a practically new set of EBC reds which are basically new. The EBC reds are installed in the brake, and the stock Avid pads will be included. Pictures:

The complete set in the box:
http://img189.imageshack.us/img189/6489/dsc027476sv.jpg

The caliper with mount (it has EBC red pads installed in it):
http://img383.imageshack.us/img383/5679/dsc027523ai.jpg

The stock Avid pads, somewhat used, just enough to break them in:
http://img462.imageshack.us/img462/5707/dsc027530ee.jpg

Another shot of the pads to show you how much material is left:
http://img457.imageshack.us/img457/7894/dsc027545xj.jpg

The brake is almost new, and comes with two sets of almost new pads. Retail for the 203mm Avid BB7 is $135 CDN, and for the EBC reds is $30, so the complete package would cost $165 CDN new. I'm asking $110 CDN. I'm flexible though, so I'll take offers on it.

[Genital Apparatus]

I've got a lot of stuff to get rid of, so I'm going to keep adding to this thread. Got a digital readout caliper with range of 155mm, can read values in both millimetres and inches. For all you wheelbuilders out there, this is a great tool for measuring hubs. Sliding ruler is made of metal, electronic casing is plastic, has a really large easy-to-read LCD, and comes in a plastic case with instructions and an extra battery. Picture:

http://img502.imageshack.us/img502/7879/dsc028202qh.jpg

Retail on it was like $60 new, and this tool is practically new, been used only a handful of times. Asking $30 CDN for the caliper.

[Genital Apparatus]

I've got a Specialized Hardrock frame with Rock Shox Judy C suspension fork. Also comes with a Shimano three speed crankset (square taper BB), rear V-brake (frame also has disc mounts), and a decent MTB saddle. Also comes with a Shimano XT rear derailleur. I will include crank bolts with this package once I get some, though they are not pictured. I will also try and get a complete headset together so I can assemble the fork with the frame. Pictures:

Full package:
http://img288.imageshack.us/img288/4752/dsc028230bb.jpg

Frame only:
http://img414.imageshack.us/img414/5453/dsc028243lh.jpg

http://img414.imageshack.us/img414/9455/dsc028261uz.jpg

http://img480.imageshack.us/img480/9439/dsc028274zl.jpg

I've also got a Race Face Deus stem and XC handlebar combo. Stem is 110mm long with 10 degrees rise. Handlebar I believe is 25" wide with 1" rise. Both pieces in great condition, and stem comes in original box. Comes with small stack of spacers. Here are the pictures:

Stem:
http://img438.imageshack.us/img438/6243/dsc027768mk.jpg

Bar:
http://img239.imageshack.us/img239/4752/dsc027798yh.jpg

Spacers:
http://img416.imageshack.us/img416/2144/dsc027819zo.jpg

Not really interested in parting out this combination of parts. I'd like to sell the whole package (frame, fork, cranks, bar, stem, other stuff) for $250 CDN, though I will take offers.

[carnagr]

I'll take the EBC red pads if you want to let those go seperate of the brake...

[Genital Apparatus]

I'll take the EBC red pads if you want to let those go seperate of the brake...

No, sorry. I'd like to sell the whole package as one. Thanks for looking though.

[Genital Apparatus]

Bump.

[Genital Apparatus]

THIS SALE IS CLOSED, ITEMS NO LONGER FOR SALE.

[Elan]

damn, i wanted that caliper