My Bike v. Stealthy

[mistri@l]

Finally got the bike all built up.
this is my Caisso.

http://i41.photobucket.com/albums/e290/JEBBERSON/bizzzzike026.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/bizzzzike025.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/bizzzzike022.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/bizzzzike020.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/bizzzzike016.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/bizzzzike014.jpg

[rush]

Nice work.

[mistri@l]

i was trying to upload pictures but i was having some trouble.
I was able to upload the pictures that i wanted though, so anyways
thats my bike.

[Acolyte]

Front EVO mounts with no booster? Not even the little factory one? You might want to change that.

Slick looking bike though.

[Noel]

that looks really great but i think you should put a bashring.

[BrettB]

very nice
i gotta get some maggies

[Matt101]

What kind of tires are those?

[trialsinhawaii]

Hey there nice bike. Stealthy?? I dunno, those rim brakes look like they'll wake the dead! Get a disc frame...and call me in the morning!
-Nathan
trialsinhawaii@hotmail.com

[trialsn]

Front EVO mounts with no booster? Not even the little factory one? You might want to change that.

Slick looking bike though.

minor flex...but nothing to worry about. i've ridden the same set up for the past 3 years...wait a minute, come to think of it that is my set up lol

[Bryan]

Looking good man!

How's it ride?

[RT Wolf]

Nick, that looks sweet! What'd you do wtih your tibo?

[toyota200x]

That looks so awesome, I love it. What bars are those?

[mistri@l]

haha you can certainly here me comming from a mile away thats for sure :run:
its a pretty basic set up actually
axiom bar n stem,
caisso frame
maggies front n back (rear with heatsink)
dx32 on some track hub with an acs clawas 18 tooth
front is a dm24 with lx
and my old mod cranks
thats the reason for no bashgaurd.
ive a big kmc chain on there so im not too worried. plus i have been riding without one for quite some time.
anyways thanks for the comments guys!
shes rides wicked sick btw.
for a 1065 frame it likes to manual on me alot when i mess up a drop or whatever.
as for my tibo
i sold that girl about a year ago
and whent through a mod phaze for a bit.
thanks guys
and thanks rush for fixin up my thread
:bigthumb:

[greyghost]

diggin' the all black

really the only way to go

[Gunner]

gotta say that bike looks hot but those cranks are lookin a bit hurtin...but whateva if they work nothinwrong...

Im lovin that tensioner though...i got the same thing going on but im using a piece of an old shirt to pull it up...

[*Andrew*]

really hot bike i like it a lot

[Cryo-Cube]

get rid of the front mag!!!! and you´re set. Vbrake or Disc

[trialsn]

nothing wrong with front mag

[mistri@l]

ive got an 8 " disk in the works.

[mistri@l]

gotta say that bike looks hot but those cranks are lookin a bit hurtin...but whateva if they work nothinwrong...

Im lovin that tensioner though...i got the same thing going on but im using a piece of an old shirt to pull it up...

yup they work.
i built this thing on a very slim budget man.
i had to use what i had. and the cranks are solid
dont give me to much trouble.

[carnagr]

What tire you got on the back there (width and make)?

[jobottDMB]

I like it. Whats with your rear sidewalls? Is that A LOT of tar or just a weak grind?

[starass]

I like it. Whats with your rear sidewalls? Is that A LOT of tar or just a weak grind?

Grind? Is that possible? I think it is tar. Lots and lots of tar, but it looks nice.

[heatsink]

Nice bike!

Would you like some free stickers to go with those pads? I've just got a fresh batch printed and maybe the white ones would be a nice touch on the rear stays.

http://www.heatsinkbikes.com/content/24ramps/URLsticker640.jpg

Give me a shout and I'll pop some in the post as a random act of kindness!

Steve

[Ottawa_biker]

thats a sweet bike i like the way the colours roll

[mistri@l]

What tire you got on the back there (width and make)?

That would be a Kenda kinetic
2.35
picked it up at canadian tire for 20$ lol.
like i said i built this up on a tight budget.

[mistri@l]

Nice bike!

Would you like some free stickers to go with those pads? I've just got a fresh batch printed and maybe the white ones would be a nice touch on the rear stays.

http://www.heatsinkbikes.com/content/24ramps/URLsticker640.jpg

Give me a shout and I'll pop some in the post as a random act of kindness!

Steve

Thank you so much!
i sent you a pm with my address
thanks again!

[mistri@l]

Grind? Is that possible? I think it is tar. Lots and lots of tar, but it looks nice.

I would never disrespect heatsinks that way man
c'mon :nono:
nah man its a light dusting of a grind.
my grinding disk is messed up so it just came out that way.
actually i didnt even need a grind with those pads,
they were sticking to the ungrinded surface realy well.

:bigthumb:

[toyota200x]

You must be really good with setting up those evo mounts. Can we see a pic from the side( no angle) on the driveside and non driveside?

[mistri@l]

Since you asked for more pictures here you go!
i had to take these in my room since its raining outside.
these pics are pretty bad quality but you get the idea.

http://i41.photobucket.com/albums/e290/JEBBERSON/bikinggdsgsdf013.jpg


http://i41.photobucket.com/albums/e290/JEBBERSON/bikinggdsgsdf018.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/bikinggdsgsdf016.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/bikinggdsgsdf007.jpg
http://i41.photobucket.com/albums/e290/JEBBERSON/bikinggdsgsdf006.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/bikinggdsgsdf043.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/fbd4c834.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/f6996b65.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/1cd5b723.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/bikinggdsgsdf041.jpg

http://i41.photobucket.com/albums/e290/JEBBERSON/8970da38.jpg


lol ok that should be enough for now.

[tomacropod]

it's kind of annoying when someone posts 70 profile shots of a bike, and no detail shots. Pretty redundant. I appreciate the pics though.

- Joel

[mistri@l]

You must be really good with setting up those evo mounts. Can we see a pic from the side( no angle) on the driveside and non driveside?

cuz that dude asked me too