HS33 Leaking, please help

[toni]

I have a leak between where the fitting screws onto the cylinder, I don't think it can be tightened anymore without breaking it. Is this the end of it or can something be done?

http://www.observedtrials.net/otn3/DSC00031.JPG

[Acolyte]

Take it apart and put a small rubber grommet in there before tightening. Either that, or call up Magura USA for advice. I've called there many times for advice, and they're good people.

[chronic]

Take the fitting out, wrap a bunch of teflon tape around the upper threads, and use a rubber washer or even a copper washer would help.

That should do it.

[ChrisB]

http://www.thetrialsinshop.com/ultimate.jpg

;)

[Motorfiets1234]

:bowrofl: at least thats what felix would say /\

[fizzmahon]

http://www.thetrialsinshop.com/ultimate.jpg

;)

Grrrrrr i want ultimates so bad but im broke after buying my GU, so ill stick with the maggies for now :(

[Turtlehead]

bubble gum

[steve]

man if its possible send them back under warranty because i has hs11s and they were leaking and they sent back brand new hs33 levers free of charge