Drilled DM24 pic needed

[kaar3l]

Could anyone give some pics of drilled dm24:)

[p1otr3k]

It's 19mm drill. I should have used 1mm smaller, then I wouldn't have touched sidewalls. However nothings going wrong with the rim.
Now it's my front rim, but it used to be rear. I had 13mm holes in it and also everything was ok;]

[AgrAde]

here is my echo predrilled one, it's pretty much a dm24 i think. looks to be a couple mm smaller hole than p1otr3k's one.

[kaar3l]

It's 19mm drill. I should have used 1mm smaller, then I wouldn't have touched sidewalls. However nothings going wrong with the rim.
Now it's my front rim, but it used to be rear. I had 13mm holes in it and also everything was ok;] Thats very nice. How much did you get weight down from those holes?
I´m choosing between drilled dm24(double wall) or drilled single wall rim.
Dm24 has more weight ,but is heavier. Singel wall is lighter ,but weaker.:wiggle:

[tomacropod]

single wall rims you have to use a heavier rimstrip as well, to stop punctures. Double wall rims you can just use light tape. I always do anyway.

- Joel

[p1otr3k]

kaar3l - I got about 50 - 60 grams from 13mm. I didn't weigh it after drilling with 19mm. You can count it;]